PAPER TRACKS
45 minute sessions
Equipment: 9:15 a.m. - 12:15 p.m.
Reliability: 9:15 a.m. - 5:00 p.m.
Safety: 9:15 a.m. - 5:00 p.m.
Sponsored by OMICRON electronics Corp. USA
Applying Modern Test Philosophies to Modern
Protective Relays
Chris Werstiuk, Manta Test Systems, Inc.
9:30 – 10:15
Vibration Analysis as a Diagnostic Tool for Detecting Mechanical Anomalies on High-Voltage Power Circuit Breakers
Fouad Brikci, Zensol Automation Inc.
10:30 – 11:15
Common Mistakes Made in Selecting and Using
Power Monitors
Bruce Lonie, PowerCET Corporation
11:30 – 12:15
First Trip Analysis of Power Circuit Breakers:
Reducing Breaker Maintenance Through First-Trip
Timing Analysis
Ron Widup, Shermco Industries
2:15 - 3:00
Use of Guard Terminal: An Added Dimension
to Insulation Testing
Jeffery Jowett, Megger
3:15 - 4:00
Effect of Spatial Resolution on IR Camera
Temperature Measurement
Robert P. Madding, Infrared Training Center, FLIR Systems, Inc.
4:15 - 5:00
Test Procedures and Calculations for End-to-End
Testing of Selected Industrial Relay Schemes
Rod Hageman, PRIT Service, Inc.
9:30 – 10:15
Applications in Power Monitoring
Ross M. Ignall, Dranetz-BMI
10:30 – 11:15
Future of Power Quality - Why Monitoring at
Substation and Point of Common Coupling Is Not
Enough
Marco Mancilla and Alex McEachern, Power Standards Lab
11:30 – 12:15
Sponsored by Cooper Power Systems
It All Starts with a Job Hazard Analysis (JHA)
Mose Ramieh III, Power & Generation Testing, Inc.
9:30 – 10:15
The Impact of NESC Rule 4: Arc-Flash Hazard
Analysis
Jim White, Shermco Industries
10:30 – 11:15
Arc-Flash Calculations Simplified
Tony Demaria, Tony Demaria Electric
11:30 – 12:15
Installing Personal Protective Grounds
Rick Eynon, Magna Electric
2:15 – 3:00
High-Voltage Program with Multicraft Work Force
Joe Rachford, Gallatin Steel
3:15 – 4:00
I’m SO Confused!!!!! 300? 300A? 301?
Craig Corey, ECP Tech Services, Inc.
4:15 – 5:00
|